Includes bibliographical references. / This investigation, primarily experimental, examines the failure of circular plates subjected to impulsive velocities. The experiments are conducted on fully clamped circular steel plates subjected to a uniformly distributed impulse. The strain-rate-sensitive mild steel plates fail with mode I (large ductile deformation), mode II (tensile-tearing and deformation) and mode III (transverse-shear) failure modes. The impulse is measured by means of a ballistic pendulum upon which the test plates are attached. During mode II and mode III failure the complete circumferential tearing of the test plate produces a circular disc. The velocity of this disc is recorded. An energy analysis is performed on the test results and an energy balance equation is formulated. Einput = Edeformation + Etearing + Edisc. The input and disc energies are obtained from the experimental measurements and the deformation energy is predicted by using the final deformed height and a shape function together with a rigid-plastic energy analysis adopted by Duffey. Etearing refers to the energy for tensile-tearing in mode II failure or the energy for transverse-shear in mode III failure. Good correlation is found and the experiments show good repeatability. The threshold velocities for the onset of failure modes II and III are given.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uct/oai:localhost:11427/14564 |
Date | January 1990 |
Creators | Teeling-Smith, R Graeme |
Contributors | Nurick, Gerald N |
Publisher | University of Cape Town, Faculty of Engineering and the Built Environment, Department of Mechanical Engineering |
Source Sets | South African National ETD Portal |
Language | English |
Detected Language | English |
Type | Master Thesis, Masters, MSc |
Format | application/pdf |
Page generated in 0.0178 seconds