Here at ISY research is performed on network processors. In order to evaluate the processors there is a need to have full control of every aspect of the transmission. This is not the case if you use a proprietary technology. Therefore the need for a well documented gigabit Ethernet network interface has emerged. The purpose of this thesis work has been to design and implement an open source gigabit Ethernet controller in a FPGA together with a device driver for the Linux operating system Implementation has been done in Verilog for the hardware part and the software was developed in C. We have implemented a fully functional gigabit Ethernet interface onto a Xilinx Virtex II-1500 FPGA together with a Linux device driver. The design uses approximately 7200 LUTs and 48 block RAMs including the opencores PCI bridge.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-7818 |
| Date | January 2006 |
| Creators | Karlsson, Thomas, Lindgren, Svein-Erik |
| Publisher | Linköpings universitet, Institutionen för systemteknik, Linköpings universitet, Institutionen för systemteknik, Institutionen för systemteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0157 seconds