Return to search

Model and Analysis of Transmission Lines on Flexible Printed Circuit for the Video Driver Circuit

With smaller electronic devices and higher transmission speeds, a digital circuit will cause potential electromagnetic interference (EMI) and signal integrity (SI) problems. Nowadays, the flexible printed circuit board (FPC) is widely used in electronic systems, especially in the video circuit. In this thesis, we used transmission line model to explain effect of the structure of the flexible printed circuit board transmission lines. Eye-diagram is a fast and convenient tool to analyze the quality of the high speed transmission, and we can use the equivalent model to substitute for the electromagnetic (EM) model to simulate the performance. We used differential circuit and the reflection gain to increase the height and width parameters of Eye-diagram, and make the quality of signal transmission higher.
For video driver circuit, since the terminal resistance is different depending on whether the IC is on or off, the standard probe cannot measure mixed-mode S-parameter directly due to the connectors. Thus, we provided a de-embedding method to remove the effects of high speed interconnect line on the test board. Finally, we use a simple structure to verify the method, and it can be used to measure mixed-mode S-parameter on the standard of Mobile Industry Processor Interface (MIPI) for D-PHY, v0.90.00.

Identiferoai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0802110-135001
Date02 August 2010
CreatorsHuang, Ming-chieh
ContributorsJian-Ming Wu, Lih-Tyng Hwang, Hsin-Lung Su, Ken-Huang Lin, Chih-Wen Kuo
PublisherNSYSU
Source SetsNSYSU Electronic Thesis and Dissertation Archive
LanguageCholon
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0802110-135001
Rightsnot_available, Copyright information available at source archive

Page generated in 0.0018 seconds