Micro cutting is becoming increasingly important since miniature and micro components/products have become more and more demanded in precision engineering applications and consumer goods in a daily life. Meanwhile, it has not been thoroughly investigated yet. Scientific understanding of the fundamentals in micro cutting mechanics and physics is vital for micro manufacturing of micro or miniature components and products. Consequently, the scientific investigation on micro cutting mechanics is critically needed, particularly on its key fundamental aspects on which a systematic approach and key enabling technologies are developed for micro manufacturing. Therefore, three key fundamental aspects of micro cutting mechanics have been identified for this PhD project and a comprehensive systematic research has been performed through both theoretical and experiment-based investigations. The three aspects of micro cutting mechanics mainly include dynamic stiffness investigation, innovative micro cutting force modelling, and the study on micro cutting heat, temperature and their partitioned distribution. All experiment-based investigations are undertaken on a diamond turning machine test rig supported with a fast tool servo (FTS) using different reconfigured experimental setups. The finite element (FE)-based analysis is conducted to further support the in-depth analysis on the micro cutting phenomena especially the modelling and simulation of micro cutting force and temperature. Accordingly, both micro cutting force modelling and micro cutting temperature are investigated using modelling and simulation supported by well-designed experimental cutting trials and validations. The investigation on dynamic stiffness in the micro cutting system is focused on its effects on the micro cutting process and its control strategies. The burrs formation and machining accuracy are explored in relation with control of the dynamic stiffness. Furthermore, the control algorithm for dynamic stiffness is developed accordingly in order to minimise burrs formation and stabilize the micro cutting accuracy. The micro cutting force modelling is performed based on specific cutting force, i.e. modelling the cutting force at the unit cutting length or area as coined as the amplitude aspect of the proposed cutting force modelling. The cutting force against a dynamically varied cutting time interval is proposed as the spatial aspect of the cutting force formulation. The amplitude aspect can provide the insight into the micro cutting phenomena particularly in relation with the chip formation and size-effects. The spatial aspect, using a on the wavelet transform (WT) technique and standard deviation analysis can render the dynamic behaviour of the micro cutting force, particularly representing the dynamic effects of the cutting process and its correlation with tool wear. The micro cutting temperature is investigated to formulate the scientific understanding of cutting temperature, heat and their partitioned distribution particularly at the tool-workpiece-chip interface zone in ultraprecision and micro cutting using a diamond cutting tool. The contribution to knowledge at this aspect is to represent the partitioned cutting heat in the micro cutting process and their different behaviours compared to the conventional metal cutting. The scientific approach to modelling micro cutting application (MMCA), i.e. based on modelling-simulation combined with experimental validation, is further evaluated and validated to illustrate the overall benefits of this research investigation through micro cutting of single crystal silicon (for ultraprecision machining of large-sized infrared devices). This approach is established in light of combining all the three aspects of the above investigation on micro cutting mechanics. The research results show the approach can lead to industrial scale advantages for ultraprecision and micro cutting but driven by the scientific understanding of micro manufacturing technology. The systematic investigation on dynamic stiffness control, micro cutting force modelling, micro cutting heat and temperature and their integrated approach can contribute well to the future micro cutting applications.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:629956 |
| Date | January 2014 |
| Creators | Sawangsri, Worapong |
| Contributors | Cheng, K. |
| Publisher | Brunel University |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://bura.brunel.ac.uk/handle/2438/9189 |
Page generated in 0.0019 seconds