MOUDRÝ Michal: Forging production of holder of steering pivot The project was elaborated in frame of engineering studies branch 2307. The aim of the project was to propose design of technology production of steering pivot holder using solid forming of steel 12 040.0. Based on literary study on die forging and made calculations forging on a vertical crank press LMZ 1000 with nominal forging force of 10MN was designed (producer ŠMERAL Brno). Lower and upper ejectors are used for ejection of components. Induction furnace type SOP 250/6-A30 P/L/T will be used for heating of the raw material. Trimming will be performed using trimming press LDO 315 A/S with press force of 3,15 MN. Dies are made of instrumental steel 19 663.9, for their clamping die clamping device QLZK 1000/UC will be used. A part of this project is economic evaluation of the production and development of production drawings. Keywords: solid forming, die forging, steel forging, holder
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229520 |
| Date | January 2011 |
| Creators | Moudrý, Michal |
| Contributors | Kopřiva, Miloslav, Novotný, Karel |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0013 seconds