The diploma thesis is focused on selected designing works related to the design of a specific process of acid water stripping. The main purpose of the work is to describe the procedure and the obtained results for these performed design work based on the relevant assignment and the process requirements. In the introductory two chapters, the work focuses on process introduction and description of main process equipment. The following chapters are devoted to the description of the designing works, specifically simulation of the process in CHEMCAD, design calculation of the spiral plate heat exchanger for feed preheating, creation of 3D model and drawing documentation using AutoCAD Plant 3D and lastly strength analysis of the selected pipeline. The main outputs of this work are mainly generated result reports from the process and equipment simulation and strength analysis of the solved pipeline route, 3D model of the process and selected technical and drawing documentation. At the end of the diploma thesis, the performed activities and their outputs are summarized and evaluated.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:443223 |
| Date | January 2021 |
| Creators | Motyka, Ondřej |
| Contributors | Kilkovský, Bohuslav, Jegla, Zdeněk |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0026 seconds