In this thesis, we use self-assembled nano metal particles as a dry etching mask to from nanopillars. The nanopillars integrated with traditional light-emitting diode (LED) p-type GaN surface is designed to increase the light extraction efficiency. The initial fabrication process adopted in this study is using 100nm SiO2 as thermal aggregation layer. The poor thermal conductivity of SiO2 material will help to accumulate heat on the surface. Then, 10nm Ni thin film is deposited on the SiO2, and rapid annealed at 900oC (working pressure of 1~3¡Ñ10-6 Torr). The Ni nanospheres are prepared to integrate with LED chip processes.
We use the etching times (pillar heights) as experimental parameters to study the degree of light extraction efficiency. Traditional right angle branch electrode samples of as grown, 20, 30, 40 sec etching time are analyzed by LI curve measurement. Under 20mA injection current, samples with 20, 30, 40 sec etching times have better light extraction than as grown, an increase of 6.54%, 3.27%, 1.63%, respectively. The experimental results reveal that self-assembled nano metal particles as a dry etching mask on the p-type GaN LED surface can increase the light extraction efficiency.
Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0727112-043304 |
Date | 27 July 2012 |
Creators | Po, Jung-chin |
Contributors | Chien-Chung Lin, Min-Hsiung Shih, Tsong-Sheng Lay, Jau-Sheng Wang, Jui-Yang Feng |
Publisher | NSYSU |
Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
Language | Cholon |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0727112-043304 |
Rights | user_define, Copyright information available at source archive |
Page generated in 0.0018 seconds