Return to search

The Post-Weld-Shift Measurement of Butterfly-Type Laser Module Packaging by Capacitance Displacememt System

A novel technique by employing a capacitance displacement measurement system to measure the post-weld-shift (PWS) caused by laser welding in the butterfly-type laser diode module packaging process is proposed. Reduction of the PWS is an important issue in developing low-cost and high-performance semiconductor laser module. Prior to the reduction and compensation of the PWS, a measurement system of PWS must be constructed.
In comparison to the high-magnification camera with image capturing system (HMCICS) limited in resolution of 0.07£gm due to its pixels, a measurement system with a higher resolution of 0.0254£gm is used. During the measurement procedure, the PWS of the ferrule probed by the sensors is converted into the fiber misalignment shifts. The coupling efficiency can be improved over 70% after compensation. The result indicates that the PWS can be qualitatively measured and quantitatively computed.

Identiferoai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0724107-150045
Date24 July 2007
CreatorsHu, Feng-ruei
ContributorsM. T. Sheen, Y. C. Shu, Y. C. Tsai, W. H. Cheng, J. H. Kuang
PublisherNSYSU
Source SetsNSYSU Electronic Thesis and Dissertation Archive
LanguageCholon
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0724107-150045
Rightsoff_campus_withheld, Copyright information available at source archive

Page generated in 0.0015 seconds