The purpose of this study is to model the beam/decking connectors (nails) of a glulam dome cap by beam/connector elements, and to analyze various dome cap models in order to investigate the potential of the beam/connector model to simulate the decking. Two- and three-dimensional beam/connector elements are formulated, tested, and evaluated.
The dome cap is modeled with I-DEAS, and the modeling procedures are briefly discussed. Four series of beam/connector dome cap models are created and analyzed: (1) models with the nailed joints at bracing points (rigid link h=0), (2) models with the nailed joints at bracing points (h>0), (3) models with 16 nailed joints per beam element (h=0), and (4) models with 16 nailed joints per beam element (h>0). Their results are compared with the dome cap models with the truss bracings. Finally, conclusions and recommendations for future research are presented. / Master of Science
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/44573 |
Date | 05 September 2009 |
Creators | Tsang, Moses T. |
Contributors | Civil Engineering |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Language | English |
Detected Language | English |
Type | Thesis, Text |
Format | x, 229 leaves, BTD, application/pdf, application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Relation | OCLC# 27748424, LD5655.V855_1992.T827.pdf |
Page generated in 0.0016 seconds