The present Master´s thesis deals with the concept of press drive of Blanking press LKDS 800 used for blanking in automatic blanking line. The first part of the thesis is dedicated to the individual arrangements of press drives and servo press drives and to the description of main components. The second part of this thesis deals with the structural design of the drive. Based on the computation of the crank mechanism, several design solutions were suggested. From these solutions, the option with the lowest drive height is selected. This option, offers the computation of the main drive, flywheel, spur gearing and clutch/brake combination. This computation is followed by computations of individual construction nodes, which include a design and dimensioning of the individual joggles, shafts and bearings. The drawing of the press and clutch shaft assemblies with a list of items are also included.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230292 |
| Date | January 2012 |
| Creators | Kolbábek, Lukáš |
| Contributors | Sláma, Jaroslav, Omes, Jiří |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds