Polymorphism and crystallinity are now recognised as important issues in drug development. This is shown by the increased amount of research in this area over recent years. In pharmaceutical development milling is an important unit operation for size reduction to improve powder handling, processing and dissolution rate. The aim of this thesis was to investigate the effect of ball milling (and cryo-milling) on the solid state properties, including amorphous drug formation, of pharmaceutical solids.
Milling was carried out using an oscillatory ball mill (Mixer Mill MM301, Retsch GmbH & Co., Germany). In cryo-milling the milling jars were immersed in liquid nitrogen for three min before milling. XRPD was used as the main technique to evaluate the milled samples. Ranitidine hydrochloride (RAN) and indomethacin (INDO) were the model drugs used in this study.
It was found that upon milling, RAN form 1 converts to RAN form 2 via an amorphous phase. A faster amorphization rate was observed when the crystalline samples were cryo-milled. Amorphous ranitidine hydrochloride was characterized to have a glass transition (T[g]) range of 13 to 30 �C and a crystallization exotherm (T[c]) between 30 and 65 �C. Conversion was found to occur faster when the temperature of the solid powder was greater than the T[c]. Under various storage conditions, similarly, crystallization of the amorphous phase mainly led to RAN form 2. However, some form 1 and amorphous phase was also detected on the XRPD diffractograms. Using partial least squares regression, the amount of solid form components in the ternary RAN mixtures were successfully quantified. RAN form 2 did not convert to form 1 under any milling (including cryo-milling) or storage conditions used in this study. Overall, RAN form 2 was found to be the thermodynamically stable form and the two (RAN) polymorphs are likely to be a monotropic pair.
In a co-milling study of INDO and RAN, the two crystalline drugs were successfully converted into a single amorphous phase after 60 min of co-milling in a cold room (4 �C). The T[g] range (26-44 �C) was also characterized for these mixtures. DRIFTS spectra of the co-milled amorphous samples indicated an interaction had occurred between the carboxylic acid carbonyl (HO-C=O) and benzonyl amide (NC=O) of the INDO molecule with the aci-nitro (C=NO₂) of RAN. Depending on the ratio of INDO to RAN, in general, the amorphous mixtures were stable at 4 �C after 30 days of storage. Crystallization was faster when the binary mixtures were stored at higher temperature or contained higher amounts of RAN in the mixture. Although XRPD and DRIFTS suggested an interaction between the two drugs, co-crystal formation was not observed between INDO and RAN.
Ball milling can be used to produce amorphous drug. The rate and extent of amorphization is dependent on the milling conditions. A faster rate of amorphization was observed when the crystalline drugs were cryo-milled. Amorphous drug formation can be made either alone or in combination with another crystalline drug. Amorphization could offer a significant improvement on the dissolution profile and the bioavailability of the poorly water soluble drug - indomethacin. Furthermore, ball milling can also be used to produce a homogenous mix between solids. The �goodmix� effect can be used for seed-induced crystallization or, when the XRPD or Raman data were combined with partial least squares regression, to create a reliable calibration model for quantitative analysis.
| Identifer | oai:union.ndltd.org:ADTP/208074 |
| Date | January 2008 |
| Creators | Chieng Heng Liang, Norman, n/a |
| Publisher | University of Otago. School of Pharmacy |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | http://policy01.otago.ac.nz/policies/FMPro?-db=policies.fm&-format=viewpolicy.html&-lay=viewpolicy&-sortfield=Title&Type=Academic&-recid=33025&-find), Copyright Norman Chieng Heng Liang |
Page generated in 0.002 seconds