This thesis deals with lasers, their general theory and application. Then a theoretical part describes laser micromachining and engraving. Experimental part of thesis deals with several experiments performed by powered fibre laser which is not primarily intended for the field of micromachining. Experiments were mainly evaluated by several types of microscopes where the amount of removed material was appraised. By particular experiments removed material was in accordance with used working parameters of laser and a significant role plays machining material. It emerges from the experiments that for the field of laser micromachining and engraving shorter pulses are more suitable (minimal pulse duration was 1 ms in experiment) and it is connected even with a way of removing material. Applied powered laser can be used for micromachining in specific fields of production.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231520 |
Date | January 2014 |
Creators | Láznička, Pavel |
Contributors | Daněk, Ladislav, Mrňa, Libor |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds