This diploma thesis deals with design and realization of a module for a digital signal procesor, for handheld RFID reader working in UHF band. It utilises a special chip EM4298 for RFID signals processing. Module is controlled by the microcontroller ATmega32L, which communicates with the PC through USB bus. Settings in EM4298 is made by a service program which processes received identifying data obtained from tags. Source codes for microcontroller are created in AVR Studio 4.13 program. Source codes for microcontroller are created in C++ Builder 6.0 program. Further thing is Desing and realization of analog interface and a UHF transceiver for wireless communication with tags. A Webench program was used for the analog interface design, which is freely available on the internet. For verification of parameters of the analog interface it was used PSpice 10.0 program. The UHF transceiver is build-up with a MAX2903 chip (transmitter) and AD8347 (receiver) and transmitting and receiving antennae.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:217543 |
| Date | January 2008 |
| Creators | Benetka, Miroslav |
| Contributors | Zamazal, Michal, Šebesta, Jiří |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds