For loading of excavator drive units, it is necessary to use electromechanical loads with a high torque up to 16,000 Nm in a low speed range from 0 to 150 min-1 with a maximum output of 50 kW. The electromechanical load consists of an asynchronous dynamometer assembly with a tilting torque measurement system in conjunction with a front three-speed gearbox. The dynamometer is powered by a converter with vector control. To determine the torque at the gearbox output, a correction must be made and the influence of operating temperature and operating speed must be taken into account. Experimental measurement of these influences and dependencies makes it possible to create a mathematical model that can be implemented in the power converter for torque control at the output of the gearbox. The aim of the master thesis is a brief design of the loading drive, design an implementation of experimental measurement of efficiency maps and evaluation of the influence of inefficiency of gearbox efficiency.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:376913 |
Date | January 2018 |
Creators | Jelének, Marek |
Contributors | Cipín, Radoslav, Ondrůšek, Čestmír |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds