This diploma thesis deals with the determination of the Young’s modulus of coatings using the impulse excitation technique (IET). The theoretical part of the thesis describes Cold and Thermal Spray technology, theoretical foundations of the impulse excitation technique and models of composite materials. The experimental part of the thesis deals with the determination of the tensile modulus of copper coating created by Cold Spray technology. The impulse excitation technique has been used to measure fifteen samples with coating thickness ranging approximately from 0,4 to 2 mm. Results from this measurement were evaluated using five composite models to establish the Young’s modulus of the applied coating. The best results were achieved by using the composite model based on rule of mixtures (ROM).
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:442844 |
Date | January 2021 |
Creators | Valášek, Daniel |
Contributors | Řehořek, Lukáš, Válka, Libor |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.001 seconds