<p>The contents of this paper present information from work conducted by utilizing plasma technology for fabric treatment. Initially, experimentation was done in low-pressure plasma systems to change the hydrophilic properties of denim fabric. From these experiments, data was collected that proved denim fabric, both sized and desized, could obtain hydrophobicity through a fluorocarbon plasma treatment. Using C3F6 fluorocarbon gas provided a greater level of hydrophobicity than using CF4 plasma gas. The desized denim showed a greater amount of hydrophobicity, in both gases, than the sized denim. These results can be found in chapter IV. The remaining work, found in chapters II and III, focuses on the utilization of atmospheric plasmas on the treatment of nylon 6,6 fabric. Atmospheric plasmas could allow continuous treatment of fabric and shorter treatment times for fabric, all of which would be better suited for industrial processing, more specifically in textiles. Nylon 6,6 fabric was treated with air-He plasma as well as air-He-O2 plasma, where the levels of O2 varied. A significant decrease in tensile strength was found in treatments lasting five minutes or longer. However, micrographs of the fiber surface illustrate instances of surface treatment, even at times less than five minutes. Continuing work on the project includes the building of a prototype machine for industry (currently in progress), the treatment of many different kinds of fabrics, and the evaluation of their mechanical, chemical, and physical properties and functionability thereafter.<P>
Identifer | oai:union.ndltd.org:NCSU/oai:NCSU:etd-20001220-102603 |
Date | 28 December 2000 |
Creators | Canup, Laura |
Contributors | Dr. Marian McCord, Dr. Orlando Hankins, Minor Committee Member, Dr. Yiping Qiu, Committee Member |
Publisher | NCSU |
Source Sets | North Carolina State University |
Language | English |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | http://www.lib.ncsu.edu/theses/available/etd-20001220-102603 |
Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0015 seconds