Return to search

Fabrication Of Aluminum Matrix Particulate Composites By Compaction And Sintering

With the possession of extremely broad unique properties, particulate reinforced aluminum composites are very attractive in diverse applications. Aluminum matrix particulate composites are challenging to work with. A single pressing and sintering process was used to fabricate the reinforced aluminum composites in this study. The key advantage of this method is its comparative low expense. However, abrasive reinforcement powders can lead to shorter tool life. To study the fundamental wear mechanisms during the die compaction process, a new method was developed and combined with experiments to quantify tool wear. Automatic die compaction experiments and tribological experiments are employed in this study. The tribologcial experiments consist of a modified pin-onlat test and a modified loop test. Mass loss of tools was recorded during all the experiments. A new tool wear model was used in this study to investigate effect of different hard phase and different lubricant level on die compaction process.

Identiferoai:union.ndltd.org:MSSTATE/oai:scholarsjunction.msstate.edu:td-3196
Date13 December 2008
CreatorsLi, Wei
PublisherScholars Junction
Source SetsMississippi State University
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceTheses and Dissertations

Page generated in 0.0018 seconds