This research develops an analytical scientific approach for investigating the high precision surface generation and the quantitative analysis of the effects of direct factors in precision machining. The research focuses on 3D surface characterization with particular reference to the turning process and associated surface generation. The most important issue for this research is surface functionality which is becoming important in the current engineering industry. The surface functionality should match with the characterization parameters of the machined surface, which can be expressed in formula form as proposed in chapter 4. Modelling and simulation are extensively used in the research. The modelling approach integrates the cutting forces model, thermal mode% vibration model, tool wear model, machining system response model and surface topography model. All of those models are integrated as a whole model. The physical model with such as direct inputs is formed. The major inputs to the model are tooling geometry and the process variables. The outputs from the modelling approach are cutting force, surface texture parameters, dimensional errors, residual stress and material removal rate. MATLAB and Simulink are used as tools to implement the modelling and simulation. According to the simulation results, it is found that the feed rate has the most profound effect on in surface generation. The influence of the vibrations between the cutting tool and the workpiece on the surface roughness may be minimised by the small feed rate and large tool nose radius. Surface functionality simulation has been developed to model and simulate the surface generation in precision turning. The surface functionality simulation model covers the material and tool wear as well. It shows that chip formation is resulted from cutting forces. Cutting trials are conducted to validate the modelling and simulation developed. There are positive results that show the agreement between the simulation and experimental results. The analysis of the results of turning trials and simulations are conducted in order to find out the effects of process variables and tooling characteristics on surface texture and topography and machining instability. From the research, it can be concluded that the investigation on modelling and simulation of precision surfaces generation in precision turning is performed well against the research objectives as proposed. Recommendations for future work are to improve the model parameters identification, including comprehensive tool wear, chip formation and using Neural Networks modelling in the engineering surface construction system.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:488675 |
| Date | January 2008 |
| Creators | Aris, Najmil Faiz Mohamed |
| Contributors | Cheng, K. |
| Publisher | Brunel University |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://bura.brunel.ac.uk/handle/2438/5092 |
Page generated in 0.0016 seconds