The aim of the thesis is to study the problems of induction motors, which belong among the most widespread and used machines. Due to their expansion, it is advisable to start the fault monitoring to prevent any more damage and losses. It can be used for condition monitoring different types of methods, which are variety technically and costly demanding to implement. It is used the method of measurement using stator currents in this thesis, because these currents are already monitored and it is easy to create devices for a more detailed analysis. The whole monitoring is carried out using products from National Instruments. The program of monitoring is created in graphical setting of LabVIEW. The analysis is conducted by calculating the Fast Fourier transform of the time signal. The result is the frequency spectrum, which contains frequency peaks and some of these peaks represent failure. The test data are collected with a DAQ device and then the same data are used for creating a methodology for evaluating online analysis and it is subsequently implemented into CompactRIO.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:219995 |
| Date | January 2014 |
| Creators | Buln, Tom |
| Contributors | Janda, Marcel, Huzlk, Rostislav |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0023 seconds