Sedimentation in dams is a natural process depending on various factors over a period of time. Sediments influence both total capacity of dam's surface and also relief of bottom.
This thesis deals with amount of sediment in Fojtka dam and with change of its bottom's relief in past 109 years since its establishment. There was conducted measuring using an echosounder in a boat. Final output derived from this experiment was a point layer including 5500 point items. Subsequently there was executed a measurement of dam's shoreline using GPS device. Data were processed in ArcGIS software, then reduced and edited to be used for interpolation tools of ArcToolbox. In order to select the most accurate interpolation method, there were created validation data, which were compared with interpolated data. The best results have been achieved by interpolation method Kriging and TIN in resolution 0.5 m.
Original maps were vectorized for comparison with current condition. Created validation data were compared in order to show accuracy of particular interpolation. The most useful evaluated method for gained data was TIN method in resolution 0.5 m. TIN method was applied in both data sets for 2D and 3D bottom relief visualization and also for calculation of actual water volume and area of water surface of the dam.
Difference in bottom's relief of Fojtka dam showed capacity reduction about 6,7 % and reduction of water surface area about 3,2 %. Regular extracting of sediment in reservoir located above the dam causes this relatively small silting ratio.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:258559 |
| Date | January 2016 |
| Creators | Vlasák, Tomáš |
| Contributors | Moudrý, Vítězslav, Hradilek, Václav |
| Publisher | Česká zemědělská univerzita v Praze |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds