Return to search

Heavy metal removal from bilge water by electrocoagulation treatment

The purpose of this research was to observe the removal efficiency for copper (Cu), nickel (Ni), and zinc (Zn) using Electrocoagulation (EC) technique in a continuous flow reactor with a synthetic bilge water emulsion; and additionally, to discuss the operation cost of the treatment. The optimal configuration for EC treatment used combined electrodes, aluminum and carbon steel; flow rate of 1 L/min; effluent recycling and 7.5 amps; this optimal configuration achieved 99% of zinc removal efficiency, 70% of both, copper and nickel removal efficiency, and low operation costs. The current intensity did not have significance incidence on the removal efficiency. The analysis of cost per gram of removed contaminant indicated that nickel had an average cost of $1.95 per gram removed, zinc and copper had $0.60 and $0.88 per gram removed, respectively. To develop additional experiments with the EC reactor are required in order to optimize metal removal efficiency.

Identiferoai:union.ndltd.org:uno.edu/oai:scholarworks.uno.edu:td-2073
Date20 December 2009
CreatorsAndrade, Milton
PublisherScholarWorks@UNO
Source SetsUniversity of New Orleans
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceUniversity of New Orleans Theses and Dissertations

Page generated in 0.0019 seconds