Return to search

Využití experimentů pro zlepšení úrovně konstitutivních modelů tkání aortálních výdutí / Exploitation of Experiments for Improvement of Level Constitutive Models of Aortic Aneurysm Tissues

This paper deals with the problem of abdominal aortic aneurysms (AAA), taking into account the possibility of using mechanical tests of aortic tissues for improvement of level of their constitutive models. First part of thesis deals with the introduction into the problem, description of the structure of the wall of the healthy aorta, its main components and the degenerative changes which lead to formation of AAA. This is followed by a brief excursion into constitutive modeling, which focuses closely on the description of the models used to describe the mechanical behavior of soft tissues. The theoretical part is then supplemented by a narrower selection of constitutive models used for modeling aortic wall and intraluminal thrombus, together with published results, which are reviewed and discussed at the end of this section. The main part of this thesis is devoted to tests of mechanical properties of arterial tissues. First, the methodology is presented together with the description of the customizations of the laboratory equipments together with the test rig. In addition, attention is focused on the results of mechanical tests of intraluminal thrombus, where the results of both uniaxial tensile tests and equbiaxial testing are presented. Also the influence of distance ILT from the lumen on the mechanical properties of the thrombus is examined. Another area of interest is the investigation of the effect of elastase on the chnage of mechanical properties of pig aorta. In this case, porcine aortas are experimentally tested only by biaxial testing, and the time of elastase action to alter the mechanical properties is analyzed so that the resulting tissue has a similar stress-strain response as aneurysmal tissue. Finally, the results of experimental measurements, limitations and other possible ways of research are summarized.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:385287
Date January 2018
CreatorsMan, Vojtěch
ContributorsHorný,, Lukáš, Rosenberg, Josef, Burša, Jiří
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/doctoralThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0016 seconds