The aim of the dissertation thesis is the control of the tube bundle on the cyclic fatigue caused by the flow past tube bundle. Fatigue due to flow is caused by flow-induced vibrations. Examined vibrations are caused by the mutual interaction of two phases (solid and liquid). The present work is focused mainly on the interaction of tube bundles with fluid. The current level of knowledge in this field allows to predict mainly static respectively quazi-static loading. These predictions are based on methods of comparing key vibration variables such as frequencies, amplitudes or speeds (see TEMA [1]). In this way, it is possible to determine quickly and relatively precisely the occurrence of a vibrational phenomenon, but it is not possible to quantitatively assess the effect of these vibrations on the damage of to the tube beam and to predict its lifespan, which would require the determination of the temperature field and the distribution of forces from the fluid on the beam. The aim of the work is to evaluate the-state-of-the-art, to perform a numerical simulation of the flow of fluids in the area of shell side under the inlet nozzle. Current methods of numerical analyses very well solve this problem, but at the expense of computing time, devices and expensive licences. The benefit of this work is the use of user-defined function (UDF) as a method for simulating interaction with fluid and structure in ANSYS Fluent software. This work places great emphasis on using the current state of knowledge for verifying and validation. Verifying and validation of results include, for example, experimentally measured Reynolds and Strouhal numbers, the drag coefficients and for example magnitude of pressure coefficient around the tube. At the same time, it uses the finite element method as a tool for the stress-strain calculation of a key part on tube such as a pipe-tube joint. Another benefit of this work is the extension of the graphical design of heat exchanger according to Poddar and Polley by vibration damages control according to the method described in TEMA [1]. In this section, the author points out the enormous influence of flow velocity on both the tube side and the shell side for design of the heat exchanger to ensure faultless operation. As an etalon of damage, the author chose a heat exchanger designated 104 from the Heat Exchanger Tube Vibration Data Bank [3]. With this heat exchanger, vibrational damage has been proven to be due to cutting of the tubes over the baffles. The last part outlines the possibilities and limits of further work.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:371777 |
| Date | January 2018 |
| Creators | Buzík, Jiří |
| Contributors | Vincour, Dušan, Lukavský, Jiří, Vejvoda, Stanislav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds