Highway bridges are considered to be one of the most susceptible constituents of transportation networks when they are subjected to severe natural hazards such as earthquakes and environmental exposures like subfreezing temperatures. To facilitate and enhance pre-hazard event mitigation and post-hazard emergency response strategies, probabilistic risk assessment methodologies have attracted increased attention, recently. Seismic fragility assessment is one of the probabilistic techniques which predicts the damage risk of the structure for a given hazard level. While fragility curves can be developed using different methods, such as expert-based, empirical, experimental, analytical, and hybrid, analytical fragility curves are perceived to be the most reliable and least biased technique. Seismic isolation systems are prevalently used in bridge structures to mitigate the damage risk of bridge components against natural hazards. However, the effectiveness of implementing recently emerged isolators such as Stable Unbonded Fiber Reinforced Elastomeric Isolators (SU-FREI) should be examined by developing analytical fragility curves of retrofitted bridges and quantifying the mitigation in the damage probability of different bridge components. In this regard, incorporating the Soil-Structure Interaction (SSI) is critical since the lateral response of bridges relies on the relative stiffness of bridge components, such as columns and isolators and the supporting soil. In addition, all bridge components are exposed to environmental stressors like subfreezing temperature that can alter the seismic response of bridges.
In the first phase of this thesis, a seismic fragility assessment is carried out on an existing multi-span continuous reinforced concrete bridge. Two bridge representations are developed to simulate the as-built bridge along with its retrofitted counterpart utilizing SU-FREI. An Incremental Dynamic Analysis (IDA) is conducted using 45 synthetic ground motion records developed for eastern Canada and damage limit states are applied to generate fragility curves and determine the probability of damage to different bridge components. Bridges are analyzed in longitudinal and transverse directions, independently, and component- and system-level fragility curves are developed. In the second phase, the previously generated bridge models are expanded to incorporate the SSI effects by introducing the pile groups under piers and abutments. Several interactions including deck-abutment, abutment-embankment, pile-soil, and pile-soil-pile interactions are considered. A significant challenge in this phase is the accurate simulation of the lateral and vertical behavior of pile groups since all pile groups comprised of closely-spaced vertical and battered piles. A ground motion suite consisting of 45 ground motions has been selected, which reflects the seismicity of the bridge site. IDA is conducted to monitor the seismic performance of the bridge from the elastic linear region up to collapse. Fragility curves, which serve as an important decision-support tool have been developed to identify the potential seismic risk of the bridge. In the third phase, a multi-hazard assessment is carried out by conditioning the previously developed bridge models (i.e. monolithic fixed-base, isolated fixed-base, monolithic with SSI, and isolated with SSI) to a range of room and subfreezing temperatures and applying a seismic excitation, simultaneously. The cold temperature behavior of the constitutive materials of different bridge components, namely, concrete, reinforcing steel, rubber, and the supporting soil are studied and reflected in the bridge models. IDA is performed and damage potential of different bridge components are quantified.
In summary, it is demonstrated that SU-FREI is a competing alternative for seismic isolation of bridges by offering potentially less manufacturing time and cost, lower weight, and easier installation which is an attractive feature for accelerated bridge construction applications. In all three phases, it is shown that the bridges which are isolated using SU-FREI have improved seismic performance in comparison with monolithic bridges by exhibiting lower probability of damage to the primary bridge components like columns and pile caps and transferring the damage to less important components such as abutments at which damage does not cause bridge closure. In addition, it is shown that seismic isolation using SU-FREI can effectively mitigate the seismic demand and damage potential of the constitutive components of a bridge supported by weak soil. While occurrence of seismic events along with an environmental stressor such as cold temperature can drastically jeopardize the functionality of a bridge supported by weak soil, it is demonstrated that seismic isolation using SU-FREI can significantly alleviate the probability of damage to bridge components. / Dissertation / Doctor of Philosophy (PhD)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/27765 |
| Date | January 2022 |
| Creators | Alesahebfosoul, Seyyedsaber |
| Contributors | Tait, Michael, Civil Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0029 seconds