Return to search

Investigation into alternative protection solutions for distribution networks

Thesis (MTech (Electrical Engineering))--Cape Peninsula University of Technology, 2009 / Recently, due to concerns about the liberalization of electricity supply, deregulation and global
impact on the environment, securing a reliable power supply has become an important social
need worldwide To ensure this need is fulfilled, detailed investigations and developments are In
progress on power distribution systems protection and the monitoring of apparatus which Is part
of the thesis.

The main objective of a protection schemes is mainly to keep the power system stable by
isolating only the affected components or the section of the electricity network in which the fault
has developed while allowing the rest of the network to continue operating. It is important to
note that the protection equipment does not prevent faults from occurring, but it limits the
damaging effect of the fault and protects other healthy equipment. This is only achieved if the
protection system of the electrical network involved complies with the requirements and purpose
of the electrical protection standards. These requirements include the Operational speed,
Reliability, Security and Sensitivity. In conventional substations that are still existing Within the
utilities networks, a number of long cables are then used to complete the links between
substation equipment in order for them to communicate (hardwired). This method is
uneconomical and is being phased out completely in the near future. Over the last few years a
new standard for substation automation communication has been developed Within the
International Electrotechnical Commission (IEC), the IEC 61850.

This standard defines the integration requirements of multi-vendor compliant relays and other
lED's for multiple protection schemes as well as control and automation techniques. In this
particular thesis, Distribution protection is the area of interest, particularly the application of
Time and Overcurrent protection schemes. A look into different protection alternatives and the
application of new technologies for Electrical Power Distribution Systems that unify protection
and control units so that they can be incorporated into Intelligent Substation as opposed to the
most existing (conventional substation) is analyzed. The proposed algorithm has been verified
through simulations of the CPUT and Eureka three phase power distribution systems. A testing
Lab is also part of this thesis and Is meant for experiments as well as simulation performance in
order to gain knowledge and skills for designing and engineer substations with lEG 61850
standards equiprnents. The results indicate that the reduction of copper wiring cable has
increased and the communication speed has improved and simplified.

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:cput/oai:localhost:20.500.11838/1107
Date January 2009
CreatorsMbango, Fessor
PublisherCape Peninsula University of Technology
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
TypeThesis
Rightshttp://creativecommons.org/licenses/by-nc-sa/3.0/za/

Page generated in 0.0019 seconds