Return to search

Monolithic high power mode locked GaAs/AlGaAs quantum well lasers

In this thesis, approaches for increasing the output power in monolithically integrated semiconductor mode locked (ML) lasers were investigated. The wavelength range considered is the range of operation of low temperature grown GaAs photomixers, devices commonly used for THz generation. In particular, two GaAs/AlGaAs quantum well laser epistructures (operating at 830 nm and 795 nm) were considered, both with reduced optical confinement and elongated vertical optical mode size. In this work, such laser epistructures, commonly used by high power semiconductor laser manufacturers, were successfully employed, for the first time, for producing passively ML devices. Improved average powers (up to 48 mW) under ML operation were demonstrated, around ten times higher than values previously reported in monolithic GaAs/AlGaAs ML lasers. In continuous wave operation, the output power was limited by the catastrophic damage of the laser facets at around 50 mW. For this reason, facet passivation techniques were investigated, allowing for powers up to 124 mW to be achieved. In ML regime, the output power was instead limited by the catastrophic damage of the reverse biased section of the laser. This failure mechanism was investigated and explained considering thermal effects on the reverse biased section. Such effects limited the output power to around 27 mW in 830 nm devices, which was then improved by 70% in 795 nm devices with a 70% larger optical mode area. The larger mode size, combined to a small duty-cycle laser geometry, enabled a record peak power of 9.8 W to be achieved at 6.83 GHz. This particular repetition rate was specifically designed for coherent population trapping experiments in 87Rb vapors. Sub-picosecond transform limited pulses were achieved in both the laser materials considered, with a minimum duration of 0.43 ps at 126 GHz. With the values of peak power achieved, the developed devices may also be directly used for two-photon microscopy applications.

Identiferoai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:535599
Date January 2011
CreatorsTandoi, Giuseppe
PublisherUniversity of Glasgow
Source SetsEthos UK
Detected LanguageEnglish
TypeElectronic Thesis or Dissertation
Sourcehttp://theses.gla.ac.uk/2721/

Page generated in 0.0017 seconds