Return to search

Global Modeling of Nonlinear Microwave Circuits

<p>A global modeling concept for modeling microwave circuits isdescribed. This concept allows the modeling of electromagnetic (EM)and thermal effects to be included in the simulation of electroniccircuits, by viewing EM and thermal subsystems as subcircuits. Then,circuit analysis techniques are developed from a general statevariable reduction formulation. This general formulation, based on thestate variables of the nonlinear devices, allows the analysis of largemicrowave circuits because it reduces the size of the nonlinear systemof equations to be solved. One of the derived analysis techniques isbased on convolution and therefore provides modeling offrequency-defined network elements not present in conventional circuitsimulators. Another analysis technique based on wavelets that wouldenable the multiresolution analysis of circuits is investigated. Also,a reduced state variable formulation using conventional time marchingschemes is developed. It is shown that this can achieve more than anorder of magnitude improvement in simulation speed compared to that oftraditional circuit simulation methods. All these developments areimplemented in a circuit simulator program, called Transim. Thisprogram provides unprecedented flexibility for the addition of newdevice models or circuit analysis algorithms. Transim supports thelocal reference concept, which is fundamental to the analysis ofspatially distributed circuits and also to simultaneousthermal-electrical simulations. Transim is applied to the transientsimulation of a 47-section nonlinear transmission line consideringfrequency dependent attenuation for the first time and the transientsimulation, also for the first time, of two quasi-optical poweramplifier arrays.<P>

Identiferoai:union.ndltd.org:NCSU/oai:NCSU:etd-20001206-175435
Date07 December 2000
CreatorsChristoffersen, Carlos Enrique
ContributorsMichael B. Steer, Amir Mortazawi, Griff Bilbro, Ilse Ipsen
PublisherNCSU
Source SetsNorth Carolina State University
LanguageEnglish
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://www.lib.ncsu.edu/theses/available/etd-20001206-175435
Rightsunrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report.

Page generated in 0.0019 seconds