Return to search

Photofunctional molecular materials for chemical sensing, bioimaging and electrochromic applications

This thesis is dedicated to developing novel photofunctional molecular materials for the applications in chemical sensing, bioimaging and electrochromic. To begin with, a brief introduction of photofunctional molecular materials and an overview of their applications in chemical sensing, bioimaging and electrochromic were presented in Chapter 1. In chapter 2, we have synthesized a series of water-soluble phosphorescent cationic iridium(III) solvato complexes (1-7) as multicolor cellular probes for imaging in living cells. All of these complexes can be dissolved in PBS. The emission of complexes can be tuned from green to red by changing the chemical structure of cyclomedtalating ligands. All complexes exhibit low cytotoxicity to living cells and exhibit cell membrane permeability and specific staining of cytoplasm. They enter the cells by the mechanism of energy-independent passive diffusion mechanisms. More importantly, complex 7 can act as a two-photon phosphorescent cellular probe, and fluorescence lifetime imaging microscopy is successfully applied for bioimaging in the presence of short-lived background fluorescence. We developed two excellent optical probes for CO2 detection in Chapter 3. The first one for the CO2 detection is a phosphorescent probe based on an iridium(III) complex with 2-phenylimidazo-[4,5-f][1,10]phenanthroline. After bubbling CO2 into the detection solution, the quenched phosphorescence by the addition of CH3COO can be recovered. Photobleaching experiment demonstrates that this phosphorescent CO2 probe shows higher photostability than some of the reported organic probes. More importantly, the time-resolved PL experiment demonstrates that this probe can be used to detect CO2 in the presence of strong background fluorescence, which improves the sensitivity and signal-to-noise ratio of the sensor in complicated media. The second one is a water-soluble fluorescent probe based on tetraphenylethene derivative. After bubbling CO2 into the detection solution, remarkable color change and fluorescence enhancement could be observed. The response of this probe to CO2 in aqueous solution is fast and the detection limit is about 2.4 × 106 M. To emphasize the practical application of this probe, a porous film was successfully fabricated by mixing the dye with sodium carboxymethyl cellulose in water, which can serve as an efficient CO2 gas sensor. More importantly, this probe exhibits low cytotoxicity towards live cells and has the ability to monitor the external CO2 concentration changes of living cells. Chapter 4 focused on the development of novel soft salt based phosphorescent probe. This type of probe consists of two oppositely charged ionic complexes with two distinguishable emission colors, which makes it a perfect candidate as a ratiometric probe. The emission color of 10 changes from blue to red with increasing pH value. 10 is cell-permeable and exhibits low cytotoxicity, and it has been successfully applied for ratiometric pH imaging with the use of confocal microscopy, demonstrating its great potential for intracellular environment monitoring. Furthermore, phosphorescence lifetime imaging experiments can detect intracellular pH variations by photoluminescence lifetime measurements, which allowed for eliminating background fluorescence and selecting long-lived phosphorescence images. Quantitative measurement of intracellular pH fluctuations caused by oxidative stress has been successfully carried out for 10 based on the pH-dependent calibration curve. A series of cationic Zn(II) complexes has been designed and synthesized in chapter 5. The photophysical properties of these Zn(II) complexes are affected by the counterions. By altering the counterions, the emission peak can be changed from 549 nm to 622 nm. Interestingly, the CIE coordinate and the emission colors can be simply tuned by adjusting the concentration of 11d in the polyether. Under an electric field of about 15 V applied onto the electrodes, the emission color of the solution of 11b-11d near the cathode changed its original emission color to sky blue. Based on this interesting electrochromic fluorescence of 11d, a quasi-solid information recording device has been successfully designed. Furthermore, data encryption has been realized by combining 1d with BODIPY, and information decoding processed has been accomplished, for the first time, by employing TPA excitation techniques, in which the large TPA cross section of 11d is differentiated from small TPA cross section of common organic dyes. Finally, Chapters 6 and 7 present the concluding remarksand the experimental details of the work described in Chapters 25

Identiferoai:union.ndltd.org:hkbu.edu.hk/oai:repository.hkbu.edu.hk:etd_oa-1205
Date24 August 2015
CreatorsMa, Yun
PublisherHKBU Institutional Repository
Source SetsHong Kong Baptist University
LanguageEnglish
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceOpen Access Theses and Dissertations
RightsThe author retains all rights to this work. The author has signed an agreement granting HKBU a non-exclusive license to archive and distribute their thesis.

Page generated in 0.0015 seconds