Electrohydrodynamic (EHD) micropumps have been developed and used in many diverse applications such as in microscale liquid cooling and various microfluidic systems. The objective of this research is to investigate different methods of enhancing the performance of ion drag EHD micropumps. In particular, the effect of electrode surface topology, applied electric field and doping agent in the dielectric liquid were investigated. The effect of 3D sharp features on the electrodes on charge injection in HFE 7100 as dielectric fluid was studied under an applied DC electric field. Micro and nano-scale features with high aspect ratio were developed on smooth copper electrodes by chemical etching or through electrophoretic deposition of single walled carbon nanotube (SWCNT). The spacing between the electrodes was kept at 250 µm. A reduction factor of 5 was achieved for SWCNT electrodes compared to the smooth case for the onset of charge injection. This study was then extended to determine its effects on the performance of ion drag EHD micropumps with 100 pairs of interdigitated electrodes. The emitter electrodes (20 µm) were half the width of the collector electrodes (40 µm), with one pump having an inter-electrode spacing of 120 µm and the other with 40 µm. Each micropump had a width of 5 mm and a height of 100 µm. SWCNT was deposited on the emitter electrodes of the micropump to generate a maximum static pressure of 4.7 kPa at 900 V, which is a 5 fold increase compared to the pump with smooth electrodes. Flow rate at no back pressure condition was improved by a factor of 3. The effect of Ferrocene as a doping agent in the working fluid HFE 7100 was studied under DC voltages. A maximum static pressure of 6.7 kPa was achieved at 700 V with 0.2% weight based doping agent, 11 times higher than when there was no doping agent at the same applied voltage. When there was no back pressure the pump generated a maximum flow rate of 0.47 mL/min at 700 V with 0.05% doping agent which is 9 times greater than with no doping agent. The effect of pulsed voltage on the performance of ion drag EHD micropump has been studied to exploit the displacement current at the sudden change of applied voltage magnitude. A range of pulse repetition rate and duty cycle were found to significantly enhance the pump performance. Static pressure generation was up to 75% and 88% greater at an optimal pulse repetition rate and duty cycle, respectively, compared to the average of the two DC levels. The effect of external flow on the discharge characteristics of an injection micropump was studied with DC volts. Higher discharge current and lower threshold voltage for the onset of charge injection in case of co-flow compared to the static case was observed. There was an optimum flow rate to generate maximum current for both co and counter-flow cases. / Thesis / Doctor of Philosophy (PhD)
| Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/20880 |
| Date | January 2017 |
| Creators | RUSSEL, MD. KAMRUL |
| Contributors | Ching, Chan, Selvaganapathy, Ponnambalam, Mechanical Engineering |
| Source Sets | McMaster University |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0019 seconds