Return to search

Breaking and curing rates in asphalt emulsions

This PhD dissertation addresses a number of issues pertaining to the use and application of surface treatments using asphalt emulsions. The work conducted as part of this research study shows in detail the problems associated with the state-of-practice and how these issues can be addressed using a scientific and rational approach as opposed to the experience-based approach which is prevailing currently. The first objective of this research study focuses on developing a methodology to determine the total amount of evaporative water loss of an emulsion before the aggregates are placed. An algorithm is presented that can be used by field inspectors and practitioners for the optimal timing of chip placement. The second objective focuses on another key aspect associated with the constructability of surface treatments, i.e., the optimal time to open a new surface treatment to traffic. Laboratory tests were conducted on the emulsion and aggregates to measure the rate of moisture loss and the evolution of the rheological properties as function of time. This was related to the field measured evaporation rates to determine the minimum stiffness required for optimal performance of the chip seal towards adequate resistance to raveling. The final objective of this dissertation focuses on developing a theoretical understanding of the current flowing through a circuit when an emulsion separates into its constituent phases when placed in an electric field. The measured current depends on a set of material properties that include the emulsion’s viscosity, surface potential, and dielectric of the medium and the strength of the electric field. A theoretical formulation was developed that relates the current flowing through the circuit with the mobility of the charged particles and the bulk charge density. The proposed theory was further utilized in developing a test procedure to quantify the breaking characteristics of asphalt emulsions. Results demonstrated that the parameters obtained from these tests were repeatable and different for different types of asphalt emulsions. It was also noticed that for a given type of emulsion the test method is sensitive to factors such as water content and partial breaking due to mechanical agitation. / text

Identiferoai:union.ndltd.org:UTEXAS/oai:repositories.lib.utexas.edu:2152/ETD-UT-2012-12-6565
Date30 January 2013
CreatorsBanerjee, Ambarish
Source SetsUniversity of Texas
LanguageEnglish
Detected LanguageEnglish
Typethesis
Formatapplication/pdf

Page generated in 0.0017 seconds