Return to search

Characterization of Catalyst Coated Membranes using Electron and X-ray Microscopy

Proton-Exchange Membrane Fuel Cells are an alternative source of electricity generation for automobiles and stationary power plants. With increasing concerns on environmental issues, recent research has focused on maximizing the efficiency and durability as well as minimizing the costs of fuel cells. One of the main areas of research is optimizing the structure of the cathode catalyst layer. The main driving force of this thesis was the effective visualization of nanostructure of the ionomer, which is responsible for proton conduction in the cathode catalyst layer. However, challenges regarding sample preparation and radiation damage still need to be well understood. Different sample preparation techniques of catalyst inks and catalyst coated membranes were used for Scanning and Transmission Electron Microscopy, such as freeze fracturing, ultramicrotomy and Focused Ion Beam. Comparisons of the microstructure and chemical differences of all components, especially the ionomer, prepared by ultramicrotomy and Focused Ion Beam, was done with Transmission Electron Microscopy and Scanning Transmission X-ray Microscopy applied to the same catalyst coated membrane sample. Detailed spectroscopic information regarding components in both specimens was compared with C 1s and F 1s near edge X-ray absorption spectra recorded in a Scanning Transmission X-ray Microscope. Focused Ion Beam causes extensive damage to the carbon support and ionomer but prepares thinner sections than ultramicrotomy. This work makes it possible to understand the limitations of each sample preparation and compositional analysis technique in order to later apply one of them to image the ionomer in the catalyst layer at the nanoscale, hopefully using tomography techniques. / Thesis / Master of Materials Science and Engineering (MMatSE)

Identiferoai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/16484
Date11 1900
CreatorsGuimarĂ£es de Azeredo Melo, Lis
ContributorsBotton, Gianluigi, Materials Science and Engineering
Source SetsMcMaster University
LanguageEnglish
Detected LanguageEnglish
TypeThesis

Page generated in 0.0019 seconds