Return to search

Materials for High Temperature Thin Film Thermocouple Applications

The thermocouple systems used for the measurement of surface temperature in high temperature applications such as advanced aerospace propulsion systems and diesel engine systems are expected to perform in rapidly fluctuating and extremely high heat fluxes corresponding to high temperatures (in excess of 1400 K) and high speed flows. Traditionally, Pt/Pt-Rh based thin film thermocouples have been used for surface temperature measurements. However, recent studies indicated several problems associated with these thermocouples at temperatures exceeding 1000 K, some of which include poor adhesion to the substrate, rhodium oxidation and reaction with the substrate at high temperatures. Therefore, there is an impending demand for thermoelectric materials that can withstand severe environments in terms of temperature and heat fluxes.

In this study, thin films of titanium carbide and tantalum carbide as well as two families of conducting perovskite oxides viz., cobaltites and manganates (La(1-x)SrxCoO3, M(1-x)Cax MnO3 where, M=La,Y) were investigated for high temperature thin film thermocouple applications as alternate candidate materials. Thin films of the carbides were deposited by r.f. sputtering while the oxide thin films were deposited using pulsed laser ablation. Sapphire (1102) was used as substrate for all the thin film depositions. All the thin films were characterized for high temperature stability in terms of phase, microstructure and chemical composition using x-ray diffraction, atomic force microscopy and electron spectroscopy for chemical analysis respectively. Electrical conductivity and seebeck coefficients were measured in-situ using a custom made device.

It was observed that TiC/TaC thin film thermocouples were stable up to 1373 K in vacuum and yield high and fairly stable thermocouple output. The conducting oxides were tested in air and were found to be stable up to at least 1273 K. The manganates were stable up to 1373 K. It was observed that all the oxides studied crystallize in a single phase perovskite structure. This phase is stable up to annealing temperatures of 1373 K. The predominant electrical conduction mechanism was found to be small polaron hopping. Stable and fairly high electrical conductivities as well as seebeck coefficients accompanied with phase, structure, composition and microstructure stability indicate that these materials hold excellent promise for high temperature thin film thermocouple applications. / Master of Science

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/46493
Date28 July 1998
CreatorsVedula, Ramakrishna
ContributorsMaterials Science and Engineering, Desu, Seshu B., Fralick, Gustave C., Curtin, William A. Jr.
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeThesis
Formatapplication/pdf, application/pdf, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
Relationfront.PDF, chapters.PDF, resume.pdf

Page generated in 0.0021 seconds