This thesis deals with design of right-angled elongated milling head for horizontal boring machine of FERMAT production. The thesis includes a detailed research of milling heads, a description of the head´s basic components and certain commercially available head´s comparison. Design part is describe components description and the design. Calculations are focused on determinating of forces generated during machining, setting of loading spectrum and the power load calculating individual gears during machining. In the next part is calculation of the reactions in the spindle bearings included, the equivalent load and durability of spindle bearings, spindle deformation and spindle bearings optimum distance. The thesis also includes spindle strength calculation, horizontal and vertical shafts analysis, gears design with helical teeth and gear strength. The thesis describes the design of extended milling head and particular design nodes which is supplemented by the 3D model. In this thesis is also included a drawing of assembly and components.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231164 |
Date | January 2014 |
Creators | Svoboda, Ondřej |
Contributors | Tůma, Jiří, Holub, Michal |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds