Return to search

The Effect of the Cutter Attitude on the Surface Roughness

The technology of multi-axis machining has been applied extensively to the manufacturing of dies, molds, and various aerospace components. For machining mechanical parts with complex, sculptured surfaces, the use of multi-axis machine tools is probably the only one solution for avoiding tool-part collision during machining. Since cutting force will be changed by cutter attitudes, the machined surface characteristic can also be affected by cutter attitudes.
In this thesis, the major concern is focused on investigating the effect of the cutter attitude on machined surface roughness. Based on the relationship between the cutter incline angle and the enveloped condition in cutting, the correlation of the mean chip thickness and the cutter incline angle is observed. To identify the relationship between the cutter attitude and the workpiece surface roughness, experimental verification is performed by milling aluminum alloy material. By fixing the cutting depths and the width of tool paths, different spindle rotational speeds and cutter incline angles are taken to machine the workpieces. And then, the machined surfaces are measured for their surface roughness. Form the experimental results, it shows that the surface roughness will reach a peak value at a special cutter incline angle. The tendency between the surface roughness and the incline angle agrees with that between the mean chip thickness and the cutter attitude approximately.

Identiferoai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0730103-092823
Date30 July 2003
CreatorsSung, Yi-Fang
ContributorsDer-Min Tsay, Kuang-Yuh Huang, Jao-Hwa Kuang
PublisherNSYSU
Source SetsNSYSU Electronic Thesis and Dissertation Archive
LanguageCholon
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0730103-092823
Rightsnot_available, Copyright information available at source archive

Page generated in 0.0018 seconds