The purpose of the diploma thesis elaborated during studies of Engineering technology is to project the technological process for production of brake hose end made of 12010.3 steel by cold forming. Based on the study of the cold forming problems and following technical calculations of the production process was designed a 3 steps process of forming. As a semiproduct was chosen wire stub with a diameter of 11.2 mm and a length of 27mm. The production is designed for automatic multistage press TPZK 25 from local manufacturers Šmeral Brno, a.s.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229518 |
| Date | January 2011 |
| Creators | Obůrka, Miloš |
| Contributors | Šlais, Miroslav, Forejt, Milan |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds