Commercial Buildings and complexes are no longer just national heat and power network energy loads, but they are becoming part of a smarter grid by including their own dedicated local heat and power generation. They do this by utilising both heat and power networks/micro-grids. A building integrated approach of Combined Heat and Power (CHP) generation with photovoltaic power generation (PV) abbreviated as CHPV is emerging as a complementary energy supply solution to conventional (i.e. national grid based) gas and electricity grid supplies in the design of sustainable commercial buildings and communities. The merits for the building user/owner of this approach are: to reduce life time energy running costs; reduce carbon emissions to contribute to UK’s 2020/2030 climate change targets; and provide a more flexible and controllable local energy system to act as a dynamic supply and/or load to the central grid infrastructure. The energy efficiency and carbon dioxide (CO2) reductions achievable by CHP systems are well documented. The merits claimed by these solutions are predicated on the ability of these systems being able to satisfy: perfect matching of heat and power supply and demand; ability at all times to maintain high quality power supply; and to be able to operate with these constraints in a highly dynamic and unpredictable heat and power demand situation. Any circumstance resulting in failure to guarantee power quality or matching of supply and demand will result in a degradation of the achievable energy efficiency and CO2 reduction. CHP based local energy systems cannot rely on large scale diversity of demand to create a relatively easy approach to supply and demand matching (i.e. as in the case of large centralised power grid infrastructures). The diversity of demand in a local energy system is both much greater than the centralised system and is also specific to the local system. It is therefore essential that these systems have robust and high performance control systems to ensure supply and demand matching and high power quality can be achieved at all times. Ideally this same control system should be able to make best use of local energy system energy storage to enable it to be used as a flexible, highly responsive energy supply and/or demand for the centralised infrastructure. In this thesis, a comprehensive literature survey has identified that there is no scientific and rigorous method to assess the controllability or the design of control systems for these local energy systems. Thus, the main challenge of the work described in this thesis is that of a controller design method and modelling approach for CHP based local energy systems. Specifically, the main research challenge for the controller design and modelling methodology was to provide an accurate and stable system performance to deliver a reliable tracking of power drawn/supplied to the centralised infrastructure whilst tracking the require thermal comfort in the local energy systems buildings. In the thesis, the CHPV system has been used as a case study. A CHPV based solution provides all the benefits of CHP combined with the near zero carbon building/local network integrated PV power generation. CHPV needs to be designed to provide energy for the local buildings’ heating, dynamic ventilating system and air-conditioning (HVAC) facilities as well as all electrical power demands. The thesis also presents in addition to the controller design and modelling methodology a novel CHPV system design topology for robust, reliable and high-performance control of building temperatures and energy supply from the local energy system. The advanced control system solution aims to achieve desired building temperatures using thermostatic control whilst simultaneously tracking a specified national grid power demand profile. The theory is innovative as it provides a stability criterion as well as guarantees to track a specified dynamic grid connection demand profile. This research also presents: design a dynamic MATLAB simulation model for a 5-building zone commercial building to show the efficacy of the novel control strategy in terms of: delivering accurate thermal comfort and power supply; reducing the amount of CO2 emissions by the entire energy system; reducing running costs verses national rid/conventional approaches. The model was developed by inspecting the functional needs of 3 local energy system case studies which are also described in the thesis. The CHPV system is combined with supplementary gas boiler for additional heating to guarantee simultaneous tracking of all the zones thermal comfort requirements whilst simultaneously tracking a specified national grid power demand using a Photovoltaics array to supply the system with renewable energy to reduce amount of CO2 emission. The local energy system in this research can operate in any of three modes (Exporting, Importing, Island). The emphasise of the thesis modelling method has been verified to be applicable to a wide range of case studies described in the thesis chapter 3. This modelling framework is the platform for creating a generic controlled design methodology that can be applied to all these case studies and beyond, including Local Energy System (LES) in hotter climates that require a cooling network using absorption chillers. In the thesis in chapter 4 this controller design methodology using the modelling framework is applied to just one case study of Copperas Hill. Local energy systems face two types of challenges: technical and nontechnical (such as energy economics and legislation). This thesis concentrates solely on the main technical challenges of a local energy system that has been identified as a gap in knowledge in the literature survey. The gap identified is the need for a controller design methodology to allow high performance and safe integration of the local energy system with the national grid infrastructure and locally installed renewables. This integration requires the system to be able to operate at high performance and safely in all different modes of operation and manage effectively the multi-vector energy supply system (e.g. simultaneous supply of heat and power from a single system).
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:761387 |
| Date | January 2018 |
| Creators | Al-Khaykan, Ameer |
| Contributors | Counsell, John M. |
| Publisher | University of Chester |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://hdl.handle.net/10034/621613 |
Page generated in 0.0023 seconds