Return to search

Hafnium solvent extraction from chloride solutions using organophosphorus reagents (Cyanex 923, 925)

A comparison of hafnium solvent extraction from hydrochloric acid solutions using either Cyanex 923 or 925 (organic extractants) diluted in kerosene was established. Since understanding of the hafnium-hydrochloric acid solution is important, development of a speciation diagram for such a solution was carried out. While both Cyanex 923 and 925 are mixtures of trialkyl phosphine oxides, the trialkyl group in the former have straight chains, while those in the latter have branched chains. / Experimentally, the major variables studied were hydrochloric acid, hafnium and Cyanex concentrations. Hafnium is rapidly loaded as the tetrachloride complex by a solvation reaction forming a disolvate with the extractant (923 or 925). While extraction increases with increasing acid concentration, it decreases with increasing hafnium concentration due to polymerization. Total chloride level is the controlling factor provided there is enough acid to prevent hafnium hydrolysis and polymerization. Cyanex 923 is a more powerful extractant than Cyanex 925 for given conditions. A few experiments have shown that a very dilute hydrochloric acid solution is suitable as a stripping agent. / The main objective is to evaluate the potential of Cyanex 923 (or 925) as an alternative to MIBK due to the problems associated with the latter. MIBK is the conventional extractant for hafnium and zirconium extraction and separation from hydrochloric acid/thiocyanate solutions. Thus, preliminary studies of hafnium and zirconium (existing separately or together) extraction from hydrochloric acid/thiocyanate solutions were also performed. When existing separately, hafnium and zirconium are similarly extracted into either Cyanex reagents, but when both metals coexist in the same solution, preferential separation of hafnium is observed.

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.69792
Date January 1994
CreatorsEl-Ammouri, Elias G.
ContributorsDistin, P. A. (advisor)
PublisherMcGill University
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
LanguageEnglish
Detected LanguageEnglish
TypeElectronic Thesis or Dissertation
Formatapplication/pdf
CoverageMaster of Engineering (Department of Mining and Metallurgical Engineering.)
RightsAll items in eScholarship@McGill are protected by copyright with all rights reserved unless otherwise indicated.
Relationalephsysno: 001403828, proquestno: AAIMM94266, Theses scanned by UMI/ProQuest.

Page generated in 0.0018 seconds