In order to design the metal delivery system for the single belt caster in the MMPC (McGill Metals Processing Centre) foundry, water modeling and mathematical modeling were carried out for a newly devised three-chamber type tundish. Water flow in the acrylic tundish was visualized using dye injection. Flow velocities were also measured using a Dual Nd-YAG PIV (Particle Image Velocimetry) system. A commercial FEM code, FEMLAB 2.3 was adopted to predict the velocity field and temperature profile within the tundish, especially in the output chamber. Calculated results were validated with the PIV measurements. A full-scale water model was built for the single belt caster to simulate the casting operation and to validate the optimized delivery system. Temperature profiles for the tundish wall were also predicted to choose a suitable method of preheating and to determine refractory wall specifications. / A three-chamber type tundish comprising an entry chamber, a head control chamber and an output chamber was designed to provide clean metal and strips of uniform thickness across the width of the belt. An output chamber proved to be essential for removing the bubbles and for obtaining a uniform film of water on the substrate by preventing strong hydraulic jump. The output chamber had to be completely closed for rapid bubble removal. For rapid filling of the output chamber at start up, the starting stopper proved to be essential. The 3-hole type nozzle, proved to be more effective for removing the bubbles, was found to have problems in terms of strongly impinging jet flow and non-uniform lateral velocities. / Using mathematical modeling and full scale water modeling, including PIV measurements, the "FD" type nozzle, which had a multi channel flow modifier in the output chamber and a slot type inlet nozzle, was found to be the best in terms of rapid bubble removal and uniform distribution of flow. This was achieved by a dramatic reduction in the strength of the vertically impinging flow towards the belt. However, this "FD" type nozzle generated a dead zone near the triple point within the output chamber. To remove the dead zone, a gently sloped shape insulator was inserted between the tundish back wall and the belt.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.84868 |
| Date | January 2003 |
| Creators | Moon, Ki-Hyeon |
| Contributors | Guthrie, Rod I. L. (advisor) |
| Publisher | McGill University |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Format | application/pdf |
| Coverage | Doctor of Philosophy (Department of Mining, Metals and Materials Engineering.) |
| Rights | All items in eScholarship@McGill are protected by copyright with all rights reserved unless otherwise indicated. |
| Relation | alephsysno: 002083210, proquestno: AAINQ98403, Theses scanned by UMI/ProQuest. |
Page generated in 0.0018 seconds