Return to search

Assessment of polycyclic aromatic hydrocarbon (PAHs) and heavy metals in the vicinity of coal power plants in South Africa

The distribution and potential sources of 15 polycyclic aromatic hydrocarbons (PAHs) in soils and Digitaria eriantha in the vicinity of three South African coal-fired power plants, Matla, Lethabo and Rooiwal were determined by gas chromatography–mass spectrometry. An ultrasonic assisted dispersive liquid-liquid microextraction (UA-DLLME) method was developed for the extraction of polycyclic aromatic hydrocarbon in soil, followed by determination using gas chromatography mass spectrometry. The study showed that an extraction protocol based on acetonitrile as dispersive solvent and C2H2Cl2 as extracting solvent, gave extraction efficiencies comparable to conventional soxhlet extraction for soil samples. The extraction time using ultrasonication and the volume of the extraction solvent was also investigated. Using a certified reference material soil (CRM), the extraction efficiency of UA-DLLME ranged from 64 to 86% in comparison with the Soxhlet result of 73 to 95%. In comparison with the real sample, the CRM result did not show a significant difference at 95% C.I. The UA-DLLME proved to be a convenient, rapid, cost-effective and greener sample preparation approach for the determination of PAHs in soil samples. PAH compound ratios such as phenanthrene/phenanthrene + anthracene (Phen/ Phen + Anth) were used to provide a reliable estimation of emission sources. The total PAH concentration in the soils around three power plants ranged from 9.73 to 61.24 μg g−1, a range above the Agency for Toxic Substances and Disease Registry levels of 1.0 μg g−1 for a significantly contaminated site. Calculated values of the Phen/Phen + Anth ratio were 0.48±0.08, 0.44±0.05, and 0.38+0.04 for Matla, Lethabo and Rooiwal, respectively. The flouranthene/fluoranthene + pyrene (Flan/ Flan + Pyr) levels were found to be 0.49±0.03 for Matla, 0.44±0.05 for Lethabo, and 0.53±0.08 for Rooiwal. Such values indicate a
xx
pyrolytic source of PAHs. Higher molecular weight PAHs (five to six rings) were predominant, suggesting coal combustion sources. The carcinogenic potency B[a]P equivalent concentration (B[a] Peq) at the three power plants ranged from 3.61 to 25.25, indicating a high carcinogenic burden. The highest (B[a] Peq) was found in samples collected around Matla power station. It can, therefore, be concluded that the soils were contaminated with PAHs originating from coal-fired power stations.
Nine metals (Fe, Cu, Mn, Ni, Cd, Pb, Hg, Cr and Zn) were analysed in soil and the Digitaria eriantha plant around three coal power plants (Matla, Lethabo and Rooiwal), using ICP-OES and GFAAS. The total metal concentration in soil ranged from 0.05 ± 0.02 to 1835.70 ± 70 μg g-1, 0.08 ± 0.05 to 1743.90 ± 29 μg g-1 and 0.07 ± 0.04 to 1735.20 ± 91 μg g-1 at Matla, Lethabo and Rooiwal respectively. The total metal concentration in the plant (Digitaria eriantha) ranged from 0.005 ± 0.003 to 534.87 ± 43 μg g-1 at Matla, 0.002 ± 0.001 to 400.49 ± 269 μg g-1 at Lethabo and 0.002 ± 0.001 to 426.91 ± 201 μg g-1 at Rooiwal. The accumulation factor (A) of less than 1 (i.e. 0.003 to 0.37) at power plants indicates a low transfer of metal from soil to plant (excluder). The enrichment factor values obtained (2.4 – 5) indicate that the soils are moderately enriched, with the exception of Pb that had significant enrichment of 20. The Geo-accumulation Index values of metals indicate that the soils are moderately polluted (0.005 – 0.65), except for Pb that showed moderate to strong pollution (1.74 – 2.53). / Chemistry / D. Phil. (Chemistry)

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:unisa/oai:uir.unisa.ac.za:10500/12001
Date11 1900
CreatorsOkedeyi, Olumuyiwa Olakunle
ContributorsNindi, Mathew Muzi, Awofolu, Omotayo Rafiu, Dube, S.
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
TypeThesis
Format1 online resource (xxi, 202 leaves) : illustrations, color map, color graphs, application/pdf

Page generated in 0.0027 seconds