The graduation theses worked up within the frame of the master study programme M21-P, field of study M-STM, sets up a proposal of the technology of the casing manufacture. The casing will be made of steel plate 11 305.21. In terms of a linear study of the questions of deep drawing and the calculation, drawing in the instrument with blankholder was suggested. The upper ejector is instrumental to the extension of the components. The intermediate product will be a roundel created by scission of the sneet panel of 1 mm size. The average of the intermediate product is 124,7 mm, while series 100 000 pieces a year. In terms of the calculations for the operation of drawing, the hydraulic press ZH 30 with specified forming power was selected.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229151 |
| Date | January 2010 |
| Creators | Březina, Stanislav |
| Contributors | Císařová, Michaela, Podaný, Kamil |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds