Yes / Nowadays Fiber Reinforced Polymers (FRPs) represent a well-established technique for rehabilitation of Reinforced Concrete (RC) and masonry structures. However, the severe degradation of mechanical properties of FRP under high temperature and fire as well as poor sustainability represents major weak points of organic-based systems. The use of eco-friendly inorganic geopolymeric matrices, alternative to the polymeric resins, would be highly desirable to overcome these issues. The present work aims to investigate the bond characteristic of a novel Steel Reinforced Geopolymeric Matrix (SRGM) strengthening system externally bonded to a concrete substrate having low mechanical properties. SRGM composite material consists of stainless steel cords embedded into a fireproof geopolymeric matrix. Single-lap shear tests by varying the bonded length were carried out. The main failure mode observed of SRGM-concrete joints was debonding at the fiber-matrix interface. Test results also suggest the effective bond length. On the basis of the experimental results, a cohesive bond-slip law was proposed. / Part of the analyses were developed within the activities of Rete dei Laboratori Universitari di Ingegneria Sismica (ReLUIS) for the research program funded by the Dipartimento di Protezione Civile (DPC), Progetto DPC/ReLUIS 2016–AQ DPC/ReLUIS 2014–2016.
| Identifer | oai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/10914 |
| Date | 08 November 2016 |
| Creators | Bencardino, F., Condello, A., Ashour, Ashraf |
| Source Sets | Bradford Scholars |
| Language | English |
| Detected Language | English |
| Type | Article, Accepted Manuscript |
| Rights | © 2016 Elsevier. Reproduced in accordance with the publisher's self-archiving policy. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/ |
Page generated in 0.0018 seconds