The presented dissertation thesis is focused on investigating the adhesive properties of façade cladding made of wood and wood-based materials in combination with flexible adhesion/assembly systems. The systems allow the implementation of effective construction joints and provide a solution with uniform stress distribution which allows the transfer of heavy loads, while simultaneously reducing the weight of the entire structure, which is also often connected with substantial cost reductions. Despite all that, little attention has been paid to this area so far. It is not a solution which is properly embodied in technical standards or in designers´, architects´ and contractors´ awarenesses. The aim of this dissertation is to characterise adhesive properties of selected façade cladding representatives made of wood and wood-based materials for the purposes of bonded joint application in a ventilated façade system. To define adhesion of façade joints, numerical and experimental methods are used, taking also various limit conditions into account. The main conclusion of the dissertation is the characterisation of basic parameters which influence adhesion, effectiveness and quality of façade glued joints. The secondary conclusion is the compilation of a simple methodical procedure for testing and implementing façade glued joints. The dissertation also makes a contribution by extending the current state of knowledge of façade adhesive joints.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:401594 |
| Creators | Nečasová, Barbora |
| Contributors | Schmid, Pavel, Sedlák,, Petr, Kovářová, Barbora |
| Publisher | Vysoké učení technické v Brně. Fakulta stavební |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds