The main goal of this diploma thesis is the examination of the influence of structure directionality on fatigue properties of formed aluminium alloy 6082/T6. The main attention is focused on the study of the influence of structure directionality on kinetics of short fatigue cracks growth. The measurement of short fatigue cracks growth was performed on cylindrical samples. The samples were made in two different directions; one parallel with the forming direction and second perpendicular to the forming direction. Servo hydraulic machine MTS 880 was used for the cyclic loading. The samples were cycled at two different constant stress amplitudes. Cyclic loading was systematically interrupted in order to measure the length of short cracks by a light microscope. Tensile tests, measuring of cycling hardening-softening curves, observation of microstructure, observation of surface relief, measuring of microhardness and fractographical analysis of fracture surfaces were used for further examination of the influence of the structure directionality. Some of these measured characteristics did not show any influence of the structure directionality (microhardness, fatigue life curve, Young modulus). In other cases is this influence measurable, however insignificant (yield stress, ultimate stress, cyclic hardening-softening curves and kinetics of short fatigue cracks growth). It can be summarised that the material, though the directionality of its microstructure is apparent, shows relatively isotropic mechanical behaviour.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228420 |
| Date | January 2009 |
| Creators | Jíša, David |
| Contributors | Mazal, Pavel, Liškutín, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds