Introduction: As fractures of the supraorbital region are far less common than midfacial or orbital fractures, a study was initiated to investigate whether fist blows could lead to fractures similar to those often seen in the midface. Methods: A detailed skull model and an impactor resembling a fist were created and a fist blow to the supraorbital region was simulated. A transient finite element analysis was carried out to calculate von Mises stresses, peak force, and impact time. Results: Within the contact zone of skull and impactor critical stress values could be seen which lay at the lower yield
border for potential fractures. A second much lower stress zone was depicted in the anterior-medial orbital roof. Conclusions: In this simulation a fist punch, which could generate distinct fractures in the midface and naso-ethmoid-orbital region, would only reach the limits of a small fracture in the supraorbital region. The reason is seen in the strong bony architecture. Much higher forces are needed to create severe trauma in the upper face which is supported by clinical findings. Finite element analysis is the method of choice to investigate the impact of trauma on the human skeleton.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa.de:bsz:15-qucosa-143957 |
| Date | 27 May 2014 |
| Creators | Hümpfner-Hierl, Heike, Schaller, Andreas, Hierl, Thomas |
| Contributors | Universität Leipzig, Medizinische Fakultät, BBG Bodenbearbeitungsgeräte GmbH,, BioMed Central, |
| Publisher | Universitätsbibliothek Leipzig |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | doc-type:article |
| Format | application/pdf |
| Source | Head & Face Medicine 2014, 10:13 doi:10.1186/1746-160X-10-13 |
Page generated in 0.0019 seconds