Return to search

Robust Repetitive Control of DC/AC Converter

This thesis applies digital repetitive control to a single-phase DC-to-AC converter,
with some proposed designs to improve stability and enhance performance of the
converter under various load variations.
A practical DC-to-AC converter is required to convert DC power to stable AC
power with low harmonic distortion when attached to various linear or nonlinear loads.
This thesis combines repetitive control with feedback dithering modulation and optimal
state feedback to control the converter. The repetitive control is responsible for
regulating output power and eliminating harmonics, while the feedback dithering
modulation for switching the power transistors with reduced switching noise and the
state feedback for stabilizing the converter under various load variations.
The presented control and modulation schemes of the power converter are
implemented on an FPGA (Field Programmable Gate Array). The experiments confirm
the excellent performance and robustness of the converter, indicating a total harmonic
distortion of less than 0.5% for the converter when attached to various linear or
nonlinear loads.

Identiferoai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0829112-114350
Date29 August 2012
CreatorsWang, Sing-han
ContributorsChung-Yao Kao, Shiang-Hwua Yu, Tzung-Lin Lee, Jau-Woei Perng
PublisherNSYSU
Source SetsNSYSU Electronic Thesis and Dissertation Archive
LanguageCholon
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0829112-114350
Rightsunrestricted, Copyright information available at source archive

Page generated in 0.0017 seconds