This work focuses on using the linear prediction based projection completion for the fan-beam and cone-beam reconstruction algorithm with no backprojection weight. The truncated data problems are addressed in the computed tomography research. However, the image reconstruction from truncated data perfectly has not been achieved yet and only approximately accurate solutions have been obtained. Thus research in this area continues to strive to obtain close result to the perfect. Linear prediction techniques are adopted for truncation completion in this work, because previous research on the truncated data problems also have shown that this technique works well compared to some other techniques like polynomial fitting and iterative based methods. The Linear prediction technique is a model based technique. The autoregressive (AR) and moving average (MA) are the two important models along with autoregressive moving average (ARMA) model. The AR model is used in this work because of the simplicity it provides in calculating the prediction coefficients. The order of the model is chosen based on the partial autocorrelation function of the projection data proved in the previous researches that have been carried out in this area of interest. The truncated projection completion using linear prediction and windowed linear prediction show that reasonably accurate reconstruction is achieved. The windowed linear prediction provide better estimate of the missing data, the reason for this is mentioned in the literature and is restated for the reader’s convenience in this work.
The advantages associated with the fan-beam reconstruction algorithms with no backprojection weights compared to the fan-beam reconstruction algorithm with backprojection weights motivated us to use the fan-beam reconstruction algorithm with no backprojection weight for reconstructing the truncation completed projection data. The results obtained are compared with the previous work which used conventional fan-beam reconstruction algorithms with backprojection weight. The intensity plots and the noise performance results show improvements resulting from using the fan-beam reconstruction algorithm with no backprojection weight. The work is also extended to the Feldkamp, Davis, and Kress (FDK) reconstruction algorithm with no backprojection weight for the helical scanning geometry and the results obtained are compared with the FDK reconstruction algorithm with backprojection weight for the helical scanning geometry.
| Identifer | oai:union.ndltd.org:IISc/oai:etd.ncsi.iisc.ernet.in:2005/2343 |
| Date | 07 1900 |
| Creators | Sumith, K |
| Contributors | Rajagopal, K |
| Source Sets | India Institute of Science |
| Language | en_US |
| Detected Language | English |
| Type | Thesis |
| Relation | G25336 |
Page generated in 0.0019 seconds