The purpose of this research is to investigate the mechanical, microstructural and corrosion performance of the ferritic stainless steel coarse powders, used in Metal Injection Molding (MIM) process. Three coarser powders made by Höganäs AB, were examined along with a commercially available fine MIM powder and samples from sheet metal. The studied powders were individually mixed with binders and then injection molded in the shape of dog bone shaped tensile bars. These green samples were then debinded and sintered to examine under different characterization methods. The methods used for examining the samples were tensile test, hardness test, metallography, SEM, chemical analysis, and salt spray test. After a comparative study of these different materials, it turns out that the chemical composition and the process parameters have more effect on materials properties compared to only particle size distribution in studied materials. After this study, 434 coarse powder was preferred upon the PolyMIM 430 fine powder, because of its lower price and same performance as that of PolyMIM 430.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-127680 |
| Date | January 2012 |
| Creators | Afraz, Syed Ali |
| Publisher | KTH, Materialvetenskap |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0012 seconds