Long-period fiber gratings (LPGs) with a period ranging from several hundred micrometers to a few millimeters can couple a core mode to discrete co-propagating cladding modes when the phase matching condition is satisfied. The rapid attenuation of cladding modes results in loss bands in the transmission spectrum. As the attenuation bands are sensitive to the LPG period and the fiber surrounding environment such as temperature, strain and ambient refractive index, LPGs can be used for sensing. However, traditional LPGs with gratings inscribed in the fibers can only sense a single point and cannot be used for distributed sensing. Although new ideas were proposed to use traveling LPG formed by a pulsed acoustic wave, the large attenuation of the acoustic wave in the fiber greatly limits the sensing range to only several meters.
In this thesis, we proposed to use a traveling LPG formed by the interference of two high power co-propagating core modes, usually LP01 and LP11. The beating of the two modes will induce a refractive index grating due to the optical Kerr effect, and the grating is called optically induced long-period fiber grating (OLPG). Compared to the grating induced by acoustic waves, OLPG is able to travel for a long distance due to the small attenuation of the guided core modes. Mode conversion in the OLPG is numerically simulated and analyzed using the finite-difference beam propagation method (FD-BPM). The result shows full conversion for both core-core and core-cladding mode coupling under phase matching condition. Moreover, the sensitivity of OLPG to temperature, axial strain and ambient refractive index is investigated and analyzed. It is seen that the sensitivities of temperature and axial strain with OLPG are different from the traditional LPGs since the period variation in OLPG is caused by the effective index difference of the two core modes at the writing wavelength, while in the traditional LPGs it is directly induced by temperature or strain. For the refractive index sensitivity with a large cladding, OLPG behaves the same as a traditional LPG with only material contributions since the grating period remains unchanged. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/52580 |
| Date | 25 September 2014 |
| Creators | Wang, Chaofan |
| Contributors | Electrical and Computer Engineering |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.021 seconds