The use of recommended S-N curves, presented in current literature, to analyse and determine the fatigue life of a part is common practice in, inter alia, the construction industry.However, the recommended S-N curves are generally created for larger components used in mainly the construction industry. Hence, the use of S-N curves for the evaluation of smaller parts, may result in over-dimensioning of such parts. For this reason, evaluation and designing of smaller parts could benefit from the development of an in house S-N curve specific for the part. The purpose of this thesis is to generate and validate an in-house method for creating a S-N curve, for a specific part to be compared with recommended S-N curves in the literature. The specific part used for the generating of the method is a welded steel joint with the geometry of two steel pipes, welded together in a t-formation and which has been provided by Thule AB for the purpose of the thesis. The method presented uses the results from 1) physical fatigue tests using a fatigue testing machine and 2) static FEA to derive a S-N curve for the specific part using the least squares method. A fatigue testing rig enables the gathering of data of the number of cycles to failure when the part is subject to a given cyclic load. The rig uses pneumatics to control the forces applied onto the part with the use of a cylinder. Furthermore, the fatigue testing rig was designed to be controlled by the applied force, meaning, that the rig ensured a homogeneous load cycle by measuring the force from a load cell and alternating the direction of the cylinder with an electrically controlled pressure valve. The performance of static FEA evaluations aim at locating stresses in the part. For this thesis the stresses were evaluated using the hot spot method due to the part's welded geometry. The data gathered from the physical fatigue tests and the static FEA evaluations are subsequently combined deriving S-N curves applicable to the part. From the fatigue tests and FEA evaluations for the t-shaped welded steel part, four S-N curves were derived of which two curves showed the results of a linear fitted curve whereas the other curves used the recommended slope of $-1/3$. The results showed that the S-N curves derived, using a set slope, resulted in similar curves to the recommended S-N curve provided by the literature. However, the linear fitted S-N curve showed that the part, according to the S-N curve, had a higher fatigue resistance than recommended. Due to limitations in the thesis work, the S-N curves derived within the framework of this thesis should be regarded as theoretical and have been strictly used to identify whether the method generated is applicable for deriving of S-N curves.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hj-57652 |
Date | January 2022 |
Creators | Anderfelt, Filip, Äse, David |
Publisher | Jönköping University, JTH, Material och tillverkning |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0027 seconds