Mechanical instabilities such as wrinkling and buckling-driven delamination in thin film-substrate systems have historically been considered as one of structural failure mechanisms, which should be avoided. The past decade has witnesssed rapid growth in harnessing such surface instabilities for a wide range of tunable surface related properties and functionalities, especially in soft materials on small scales. Compared to extensively studied wrinkling on soft substrates and localized buckling driven delamination on stiff substrates, the fundamental mechanics underpinning ordered buckle-delamination on soft substrate over large area and its guidance for potential implications in engineering innovation remain largely to be explored. This thesis aims to partially bridging such a knowledge gap. In this thesis, I exploit how to generate the controllable and globally periodic delaminated buckling patterns in thin films on highly prestrained elastomeric substrates, and then explore the fundamental mechanics of this spontaneous extreme buckling driven periodic delamination, as well as its implications in design of extremely stretchable electronics and interfacial mechanical properties measurement. Compared to wrinkling, one of the benefits of extremely buckling driven delamination is the extraordinarily high aspect ratio of buckles. The large surface roughness and high local curvature could potentially enable extreme surface topographies related properties, such as adhesion, wetting, friction, and optics, as well as augment the extreme stretchability in stretchable optical and electronic devices. In the aim of harnessing this extreme buckling driven delamination, I first explore the formation and evolution of extraordinarily high-aspect-ratio delaminated buckles of thin films on 400% pre-strained elastomers, as well as uncovered the underlying deformation mechanism through combining quantitative theoretical analysis and experimental and numerical approaches. A theoretical framework is developed to describe the formation and evolution process of periodic delaminated buckles, which includes three deformation stages, i.e. onset of localized blisters (Stage I), growth and propagation of delamination (Stage II), and post-buckling after delamination arrest (Stage III). I show that under extreme large compressive strain, the profile of periodic blisters changes from sinusoidal shape to jig-saw-like shape with relative high aspect ratio, which have potential applications for design of extremely stretchable electronics. Equipped with the fundamental mechanics of buckle-delamination in thin films, I then exploit harnessing the spontaneous buckling driven periodic delamination to achieve high stretchability in both metal and silicon films. Experimentally I observe periodic buckle-delaminated patterns over large area, accompanied by highly ordered transversely cracking patterns, which can be theoretically predicted by simple crack fragments model. I hypothesize that when the width of ribbons is set to be equal or smaller than the theoretically predicted crack fragment width, there would be no cracking fragmentation. This criteria for designing crack-free micro-ribbons is further validated by related experiments. Guided by the validated criteria, I successfully design crack-free and spontaneous delaminated ribbons on highly prestrained elastomer substrates, which provides a high stretchability of about 120% and 400% in Si and Au ribbons, respectively. I further extend the buckling instability-based metrology to systematically measure the mechanical properties of 2D organic conjugated polymer nano-films, which have tremendous promising applications in organic integrated circuits, solar cells, and stretchable devices. I develop a new fabrication strategy to generate buckle-delaminated free-standing organic conjugated polymeric (P3BT/C60) nanosheets. Through both experiments and theoretical analysis, I show that the free-standing buckle-delaminated organic P3BT/C60 nanosheets have significant advantages over the traditional spin-coated wrinkled nanosheets, including the enhanced mechanical properties, a higher level of stretchability with lower electrical resistance, and a wider range of controllable wettability modulation. / Mechanical Engineering
Identifer | oai:union.ndltd.org:TEMPLE/oai:scholarshare.temple.edu:20.500.12613/3932 |
Date | January 2019 |
Creators | Zhang, Qiuting |
Contributors | Yin, Jie, Ren, Fei, Darvish, Kurosh, Du, Liang |
Publisher | Temple University. Libraries |
Source Sets | Temple University |
Language | English |
Detected Language | English |
Type | Thesis/Dissertation, Text |
Format | 128 pages |
Rights | IN COPYRIGHT- This Rights Statement can be used for an Item that is in copyright. Using this statement implies that the organization making this Item available has determined that the Item is in copyright and either is the rights-holder, has obtained permission from the rights-holder(s) to make their Work(s) available, or makes the Item available under an exception or limitation to copyright (including Fair Use) that entitles it to make the Item available., http://rightsstatements.org/vocab/InC/1.0/ |
Relation | http://dx.doi.org/10.34944/dspace/3914, Theses and Dissertations |
Page generated in 0.002 seconds